Polarity has over 30 years of experience in electronic design, circuit simulation, PCB design and test, RF amplifier design, microwave amplifier design, and power supply design. Polarity will act as an OEM providing high volume manufacturing and on time delivery. Polarity also provides contract engineering services for all types of electronic design.

Please review Polarity's design capabilities listed below:

Electronic Design

  • Power supplies - Switch mode and linear

  • DC to DC converters

  • Buck/boost regulators

  • Solid state RF amplifiers

  • PLD and DSP filters

  • CPU based monitor and control systems (touch screen) - volt, current, temp, pressure, humidity, flow, and logic interlocks

  • Serial communication DACs and ADCs - can be fiber optically linked to CPU

  • Instrumentation amplifiers for monitoring and control

  • High-speed high-gain regulating amplifiers

High Voltage Power Supply Design

  • Linear Ultra Low Noise - 600V to 50kV, 100kW

  • Switch Mode - 600V to 50kV, 50kW max.

RF Amplifier Design

  • Wide band amplifiers - 10KHz to 10MHz

  • High voltage resonant amplifiers - 1MHz to 2MHz, 1KV to 3KV

High Power Microwave Amplifier Design

  • Low noise TWT amplifier microwave systems - 50W to 10KW

  • High power klystron microwave systems - 5kW-100kW CW to 5MW peak.

  • Design to mil-spec ultra low noise, high power radar and communication amplifiers.

  • Design to commercial spec high power CW or pulsed industrial microwave systems.

Software/Computer Hardware Development

  • Polarity provides software and firmware development for embedded controllers and system automation. Our software engineers can integrate all types of test equipment (HP, Lecroy, Tektronix, etc...) to fully automate manufacturing and testing procedures.

  • Programming languages include: C, C++, Turbo Pascal, Visual Basic (VBA)

US Navy Contracts Polarity, Inc.
The US Navy awarded Polarity with a contract to design and build their new advanced magnetron test systems. These magnetron test systems will use Polarity's high performance solid state modulator and 10KW, 40KV cathode power supply. Contract issuance through 2005. _________________________

Polarity Now Offering TWT Test Sets:
Polarity, Inc. is now offering TWT test sets that have a 15KV cathode power supply, 3ea-3KW collector power supplies, 3KV swing grid modulator, and a 8V, 8A heater supply. This product was developed as a low cost solution for the TWT manufacturing industry. _________________________

Polarity Acquires New Manufacturing Facility:
Polarity, Inc. acquires new facility that increases our engineering and manufacturing square footage by four times. Located in Rancho Cordova, Polarity, Inc. is scheduled to be in the new space by February 1, 2004. See company profile page. _________________________

Polarity Improves and Expands Employee Benefit Program by Contracting with Administaff, Inc.: Polarity, Inc. now offers an expanded employee benefit program including payroll services, medical/dental/ vision benefits, 401K plan, and HR administration support to meet the growing needs of it’s current and future employees. _________________________

Industrial/Commercial Power Supplies 
Now Offered:

Polarity, Inc. is now offering 300V, 100W and 600v, 100W industrial power supplies. These power supplies are being used by the United States Navy for pulse mode applications. Polarity is also offering a commercial version of these power supplies. 
_________________________

Third Generation 1MHz, 2.5KV RF Source Complete:
Polarity completed its third generation 1MHz, 2.5KV RF source that integrates with TOF Mass Spec systems. The rack mount RF Source has a built in crowbar system that is connected electrically across the RF output. It is used to clamp the RF output to less 30V in less than 500ns. Crowbar triggering can be accomplished before the output extraction pulse so that system propagation delay can be accounted for to successfully detect and analyze negative ions. This will enable the BIOresearch firms to look at different proteins with TOF Mass Spec technology.
_________________________

US Air Force Contracts Polarity®:
The US Air Force awarded Polarity with a contract to design and build a Radar Transmitter power system. The radar transmitter will utilize Polarity's high power, solid-state anode modulator and high speed crowbar. Contract issuance through 2004.
_________________________

US Trademark Issued:

Polarity, Inc. was issued a United States Trademark on October 22, 2002 for our corporate logo "Polarity®".
_________________________

New Contract Award:

Polarity was awarded a US Navy contract to design and build eighteen (18) high voltage power supplies with integrated high-speed solid-state modulators. Contract issuance through 2003.
_________________________

New Contract Award:
Polarity's R&D group has developed a 2KV, 1MHz RF amplifier that is configurable 2MHz. Two Biotech manufacturers have contracted Polarity to be the OEM for these amplifiers for use in their mass-produced TOF mass spectrometers. Polarity will start volume manufacturing in November 2002.
_________________________

US Patent Issued:
Polarity was issued a US patent for it's innovative Solid State Modulator design. This modulator has the best MTBF in the industry.
_________________________

Authorized Distributor:
Eupec designated Polarity as an authorized distributor for their IBGT's and other related products. Polarity provides technical support for our Eupec customers.
 

 

Home : Products : Custom Solutions : Engineering Services : Company Profile : Career Opportunities : Contact
Polarity is a Trademark and is the property of Polarity, Inc.
© This website, and all contents thereof, Copyright 2002 by Polarity, Inc.
Sacramento Web Design by TaylorMade Web Creations